NSN 9330-01-502-3754 · NIIN 015023754 · FSC 9330
NO DASHES 9330015023754
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 25.440 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 27.300 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGLE WITH UPPER CORNERS CUT OFF AT 30 DEGREE ANGLE 17.00 INCHES FROM BOTTOM/SHORT EDGE & WITH OVAL CUTOUTS ON THESE CUTOFF EDGES WITH 2.50 RADII, WITH LOWER ARCS CENTERED 3.24 FROM OUTER EDGES (BEFORE CUTOFF) & 20.62 FROM BOTTOM EDGES EXTENDING UP ON CUTOFF EDGE 7.50 INCHES TO UPPER ARC; 4 MORE CUTOUTS: CIRCLE WITH 1.06 RADIUS CENTERED 4.17 FROM BOTTOM & 1.92 FROM RIGHT EDGE ALONG NEAR SURFACE & EXTENDING TO BOTTOM EDGE, A KIDNEY SHAPE WITH LOWER RADIUS OF 0.75, CENTERED 2.10 FROM RIGHT EDGE & 8.00 FROM BOTTOM & UPPER ARC WITH 1.75 RADIUS, CENTERED 2.72 FROM RIGHT & 10.50 FROM BOTTOM; NEARLY OVAL, WITH LOWER ARC WITH 1.50 RADIUS, 3.49 FROM LEFT EDGE & 6.31 FROMBOTTOM & UPPER ARC WITH 1.75 RAD,2.72 FROM LEFT & 10.50 FROM BOTTOM & BUMP WITH 1.00 RADIUS, CENTERED 1.92 FROM LEFT & 8.00 FROM BOTTOM, A 3 INCH TUBE EXTENDING FROM THIS CUTOUT TO THE RIGHT DOWNWARD TO FAR SURFACE THEN BACK UP TO TOP SURFACE AT BOTTOM EDGE, 10.12 FROM LEFT & 1.50 FROM TOP SURFACE |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950825-45 | 26512 |
| 160D950825-45 | 3J310 |
| 160D950825-45 | 79RG9 |