NSN 9330-01-502-4056 · NIIN 015024056 · FSC 9330
NO DASHES 9330015024056
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 11.640 |
| ABNM | THICKNESS | INCHES NOMINAL 6.750 |
| ABRY | LENGTH | INCHES NOMINAL 38.140 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR; FAR SIDE HAS LENTHWISE GROOVE ALONG TOP EDGE, 1.00D, TAPERING FROM 4.00W AT RIGHT EDGE (NEAR SIDE UP) TO 3.00 DEEP AT LEFT EDGE; AN ARCHED CUTOUT ALONG TOP SURFACE, 3.00W, 1.12 INCH FROM RIGHT EDGE, ENDING IN CIRCLE CENTERED 2.67 FROM RIGHT & 4.87 FROM TOP; A SEMICIRCULAR GROOVE ON FAR SURFACE WITH 1.48 RADIUS, CENTERED 23.81 FROM RIGHT EDGE AT TOP EDGE, ANGLING DOWN AND TO RIGHT THEN OVER TO RIGHT EDGE, ENDING 5.00 FROM TOP -SEE DRAWING FOR DETAILS; NEAR SIDE IS MARKED: "FWD" & "UP" ON 2 LINES IN UPPER LEFT CORNER & WITH PART NUMBER IN LOWER LEFT CORNER |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950825-69 | 26512 |
| 160D950825-69 | 3J310 |
| 160D950825-69 | 79RG9 |