NSN 9330-01-502-5591 · NIIN 015025591 · FSC 9330
NO DASHES 9330015025591
In Stock
PLASTIC MATERIAL,CELLULAR
Plastics Fabricated Materials
Application: AIRCRAFT, THUNDERBOLT II, A-10
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAU | FIRE RETARDING CHARACTERISTIC | NOT FIRE RETARDING |
| ABGL | WIDTH | INCHES NOMINAL 14.200 |
| ABNM | THICKNESS | INCHES NOMINAL 4.000 |
| ABRY | LENGTH | INCHES NOMINAL 20.940 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, THUNDERBOLT II, A-10 |
| BDNZ | DENSITY RATING | POUNDS PER CUBIC FOOT 1.2 |
| CTLY | COMPRESSION STRENGTH AT 25 PCT DEFLECTION | POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILLER FOAM |
| FEAT | SPECIAL FEATURES | RECTANGULAR WITH CUTOUT ON RIGHT/SHORT EDGE: 1.26WX1.00H, 4.00 INCHES FROM BOTTOM EDGE; 2 CUTOUTS ON LEFT EDGE: 1.26WX2.50H, 2.50 FROM BOTTOM & 1.26WX1.40H, 2.08 FROM TOP; NEAR SIDE HAS 2 LENGTHWISE GROOVES: RECTANGULAR, 2.08WX1.40D ALONG TOP EDGE & SEMICIRCULAR WITH 2.00 INCH RADIUS CENTERED 6.16 FROM BOTTOM & 0.70 FROM NEAR SURFACE; NEAR SIDE IS MARKED: "UP" & "FWD" ON 2 LINES IN UPPER LEFT AREA (BELOW GROOVE) & WITH PART NUMBER TO THE RIGHT; FAR SIDE IS CHAMFERED 45 DEGREES, 0.50 INCHES AT BOTTOM EDGE |
| MATT | MATERIAL | PLASTIC POLYURETHANE |
| SFCD | SURFACE CONDITION | ROUGH |
| SUPP | SUPPLEMENTARY FEATURES | MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 160D950827-233 | 26512 |
| 160D950827-233 | 3J310 |
| 160D950827-233 | 79RG9 |