NSN 5945-00-987-4619 · NIIN 009874619 · FSC 5945
NO DASHES 5945009874619
In Stock
SOLENOID,ELECTRICAL
Relays and Solenoids
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ASXH | VOLTAGE RATING IN VOLTS | AC NOMINAL 115.0 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | BRACKET(S) 1 AND THREADED HOLE(S) 3 |
| AXNP | CURRENT RATING | MILLIAMPERES MAXIMUM 150.0 |
| AASA | THREAD LENGTH | POWER TAKEOFF FACILITY HOLE INCHES MINIMUM 0.250 |
| CQYJ | MOUNTING FACILITY PATTERN | ISOSCELES TRIANGLE |
| CSQJ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE | INCHES NOMINAL 0.500 |
| CWKC | CASE SURFACE TREATMENT | NICKEL |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CNXT | ACTUATOR STROKE TYPE | PULL |
| CNXW | LINEAR FORCE DELIVERED | OUNCES 6.00 |
| CNXX | POWER TAKEOFF CONNECTION TYPE | INTERNAL THREADS |
| CNYD | ENERGIZING STROKE MAXIMUM LENGTH | INCHES 0.150 |
| CQJX | NOMINAL THREAD SIZE | ALL FACILITIES HOLE INCHES 0.112 |
| CQTM | TERMINAL LOCATION | CIRCUMFERENCE |
| AAJD | THREAD CLASS | 2B |
| AEXW | MOUNTING BASE WIDTH | INCHES NOMINAL 1.562 |
| AFGK | ACTUATOR LENGTH | INCHES MINIMUM 0.180 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.250 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.620 |
| THSD | THREAD SERIES DESIGNATOR | ALL FACILITIES HOLE UNIFIED NATIONAL COARSE (UNC) |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDERLESS LUG 2 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED |
| APAF | MAGNETIC COIL QUANTITY | 1 |
| APNP | DUTY TYPE | CONTINUOUS |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 06481-935084 |
| MATT | MATERIAL | CASE STEEL |
| FEAT | SPECIAL FEATURES | MATERIAL DOCUMENT AND CLASSIFICATION: DAMIL-S-4040,SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: DAMIL-C-26074 |
| AFUR | ACTUATOR DIAMETER | INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.405 |