NSN 3110-00-042-4823 · NIIN 000424823 · FSC 3110
NO DASHES 3110000424823
In Stock
BEARING,BALL,AIRFRAME
Bearings, Antifriction, Unmounted
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.3747 AND INCHES MAXIMUM 0.3750 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.8746 AND INCHES MAXIMUM 0.8750 |
| AGVT | OUTER RING WIDTH | INCHES MINIMUM 0.2450 AND INCHES MAXIMUM 0.2500 |
| AGVU | INNER RING WIDTH | INCHES MINIMUM 0.3105 AND INCHES MAXIMUM 0.3130 |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZC | LOAD DIRECTION | RADIAL |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| FEAT | SPECIAL FEATURES | 80 PCT FULL OF SPECIFIED LUBRICANT;ANIAL PLAY 0.0300 IN. MAX.; HEAT TREAT RINGS AND BALLS TO ROCKWELL C TO 60 TO 66; HEAT STABLISHED FOR OPERATION AT 250 DEG F; 8 DEG SELF-ALIGNING IN EITHER DIRECTION; BALL BRNG STYLE:NO. 167 IN OLD A04400 FIIG;AFBMA STANDARD TOLERANCE DESIGNATION:AFBMA STANDARD TOLERANCE FOR AIRFRAME BALL BRNGS; ALIGNING RING:NOT INCLUDED; SEAL RETAINERS AR CORROSION RESISTANT STEEL; SURFACE TREATMENT AND LOCATION:ALL EXTERNAL SURFACES ARE CADMIUM QQ-P-416 TYPE 1 CLASS 2. THIS DOES NOT INCLUDE THE BORE,SEAL AND SEAL RETAINERS |
| MATT | MATERIAL | BALL STEEL COMP E51100 OR STEEL COMP E52100 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MATT | MATERIAL | SEAL PLASTIC POLYTETRAFLUOROETHYLENE |
Supersedes
This item replaces cancelled NIIN 007322818. An older drawing citing one of those numbers resolves here.