NSN 3040-00-517-5179 · NIIN 005175179 · FSC 3040
NO DASHES 3040005175179
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Miscellaneous Power Transmission Equipment
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SCSZ | CROSS SECTION SIZE | DIAMETER FIRST END INCHES NOMINAL 0.203 |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| AASA | THREAD LENGTH | BOTH ENDS INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.375 |
| AGGZ | SHANK OUTSIDE DIAMETER | BOTH ENDS INCHES NOMINAL 0.344 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | BOTH ENDS UNS |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CGDN | MINIMUM OPERATING RADIUS | INCHES 6.000 |
| FEAT | SPECIAL FEATURES | RD PERMANENT KEYED DRIVE END |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES NOMINAL 24.000 |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES NOMINAL 0.243 |
| CFRW | END OVERALL DIAMETER | BOTH ENDS INCHES MINIMUM 0.875 AND INCHES MAXIMUM 1.000 |
| CFRZ | CORE OVERALL LENGTH | INCHES NOMINAL 24.875 |
| ADMS | WRENCHING FACILITY OUTSIDE DIAMETER | BOTH ENDS INCHES NOMINAL 0.936 |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| MATT | MATERIAL | CORE STEEL |
| SCSZ | CROSS SECTION SIZE | ACROSS FLATS SECOND END INCHES NOMINAL 0.104 |
| SFTT | SURFACE TREATMENT | CASING ZINC |
| AEDN | TIP LENGTH | BOTH ENDS INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.625 |
| APTD | END TYPE | FIRST END ROUND KEYED |
| AAJD | THREAD CLASS | 2A |
| APTD | END TYPE | SECOND END SQUARE MALE |
| ASDB | WIDTH ACROSS FLATS | BOTH ENDS INCHES NOMINAL 0.813 |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED EXTERNAL |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS HEXAGON |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.130 |
| APJC | THREAD LOCATION | FIRST END INTERNAL |
| APJC | THREAD LOCATION | SECOND END EXTERNAL |
| MATT | MATERIAL | CASING STEEL |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 24.875 |
Supersedes
This item replaces cancelled NIIN 003317889. An older drawing citing one of those numbers resolves here.