NSN 9535-01-467-9575 · NIIN 014679575 · FSC 9535
NO DASHES 9535014679575
In Stock
PLATE,METAL
Plate, Sheet, Strip, and Foil; Nonferrous Base Metal
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARN | FABRICATION METHOD | ROLLED |
| ABGL | WIDTH | INCHES MINIMUM 2.450 AND INCHES MAXIMUM 2.550 |
| ABRY | LENGTH | INCHES MINIMUM 32.450 AND INCHES MAXIMUM 32.550 |
| ADVM | CROSS-SECTIONAL THICKNESS | INCHES NOMINAL 0.5000 |
| AGTA | BASIC SHAPE STYLE | |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 40000 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 28000 |
| FEAT | SPECIAL FEATURES | PROTECTIVE FINISH PER PARAGRAPH 3.4. INTERIOR PAINT SYSTEM. DRAWING 12350824; THERE ARE 4 HOLES IN THIS PLATE - ONE NEAR EACH CORNER MEASURING 0.406-0.460 IN. IN DIAMETER. THEY ARE 0.750 IN. IN ALONG WIDTH AND 0.500 IN. IN ALONG LENGTH; TWO OTHER ADD'L OPTIONAL MATERIALS ARE LISTED: ALUMINUM PER SPECS QQ-A-200/4 AND QQ-A-200/5; ALL MATERIAL FOR PLATE IS 0.500 IN. THICK |
| MATT | MATERIAL | ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5083 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-A-250 TO 7 AND FED SPEC 2ND MATERIAL RESPONSE QQ-A-250 TO 6 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12383192 | 19207 |