NSN 9535-01-509-9620 · NIIN 015099620 · FSC 9535
NO DASHES 9535015099620
In Stock
SHEET,METAL
Plate, Sheet, Strip, and Foil; Nonferrous Base Metal
Application: REDUCER, LCL HEAT EXCHANGERS; ASDS
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABGL | WIDTH | INCHES NOMINAL 12.500 |
| ABRY | LENGTH | INCHES NOMINAL 22.940 |
| ADVM | CROSS-SECTIONAL THICKNESS | INCHES NOMINAL 0.0600 |
| AGAV | END ITEM IDENTIFICATION | REDUCER, LCL HEAT EXCHANGERS; ASDS |
| AGTA | BASIC SHAPE STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | COVER, OUTER |
| FEAT | SPECIAL FEATURES | LEFT/SHORT SIDE IS CUTOUT FROM POINT 3.39 IN. FROM TOP ON A SLANT TO POINT 10.96 DOWN AND 5.50 FROM LEFT EDGE, THEN STRAIGHT DOWN TO BOTTOM EDGE; RIGHT SIDE HAS SIMILAR CUTOUT FROM 3.39 DOWN TO POINT 10.96 DOWN AND 5.50 FROM RIGHT EDGE, THEN STRAIGHT TO BOTTOM; COVER BENDS UP AT 4.7 DEG. ANGLE, 3.41 IN. FROM TOP EDGE AND BENDS DOWN AGAIN, AT SAME ANGLE, 10.98 FROM TOP EDGE; THERE ARE 18 HOLES, 0.096-0.101, DRILLED THRU, 4 EACH IN TOP AND BOTTOM RECTANGULAR AREAS AND 5 ON EACH SLANTED EDGE; THERE ARE ALSO 4 HOLES, 0.248-0.255 CENTERED 0.375 IN. FROM TOP EDGE AND 3.408, 8.784, 14.160 AND 19.536 IN. FROM LEFT EDGE - SEE DRAWING FOR LOCATION OF OTHER HOLES |
| HEAT | HEAT TREATMENT | H-32 STRAIN HARDENED |
| MATT | MATERIAL | ALUMINUM ALLOY 5052 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AST- B209, TE-ER H32 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6391037-1 | 31442 |
| 6391037-01 FIND 1 | 53711 |
| 6391037 | 53711 |
| 6391037-1 | 53711 |