NSN 9540-01-071-5878 · NIIN 010715878 · FSC 9540
NO DASHES 9540010715878
In Stock
ANGLE,STRUCTURAL
Structural Shapes, Nonferrous Base Metal
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARN | FABRICATION METHOD | EXTRUDED |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.750 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 3.500 |
| ABRY | LENGTH | FEET MINIMUM 10.000 AND FEET MAXIMUM 12.000 |
| ADXL | LEFT SIDE FLANGE THICKNESS | INCHES NOMINAL 0.093 |
| AGTA | BASIC SHAPE STYLE | |
| AJGL | FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | INCHES NOMINAL 0.156 |
| AJGP | BASE FLANGE THICKNESS | INCHES NOMINAL 0.093 |
| BRFD | WEIGHT PER UNIT MEASURE | POUNDS PER LINEAR FOOT 0.588 |
| CMZY | FIRST TIP STYLE | |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| CQHP | LEFT INSIDE ANGLE | DEGREES NOMINAL 90.0 |
| HEAT | HEAT TREATMENT | T-6511 SOLUTION HEAT TREATED |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE A-S-Q-A-200 TO 11 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 81755-K10 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | ALLOY 7075 AND TEMPER T6511 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12502 | 27610 |
| 14861 | 27610 |
| 22569 | 77783 |
| QQ-A-200/11 | 81348 |
| ASTM B221 | 81346 |
| AMS-QQ-A-200/11 | 81343 |
| BAC1503-7672 | 82918 |
| K10D84T6511 | 81755 |
| MS14287E037 | 96906 |
| 13816 | 01634 |
| PA5670 | 06012 |
| AMS-QQ-A-200/11 | 0U583 |
Supersedes
This item replaces cancelled NIIN 001458457. An older drawing citing one of those numbers resolves here.