NSN 9540-01-469-3308 · NIIN 014693308 · FSC 9540
NO DASHES 9540014693308
In Stock
BEAM,STRUCTURAL
Structural Shapes, Nonferrous Base Metal
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARN | FABRICATION METHOD | EXTRUDED |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 4.440 |
| ABRY | LENGTH | INCHES MINIMUM 18.800 AND INCHES MAXIMUM 18.820 |
| ADXR | LEFT SIDE TOP FLANGE THICKNESS | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| ADXS | RIGHT SIDE TOP FLANGE THICKNESS | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| AGTA | BASIC SHAPE STYLE | |
| AJJP | LEG THICKNESS | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| BPXD | LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | INCHES NOMINAL 2.560 |
| BPXG | RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | INCHES NOMINAL 2.560 |
| BPXJ | FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.130 |
| BPXL | FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.130 |
| BQJG | TOP FLANGE WIDTH | INCHES NOMINAL 5.120 |
| CMZY | FIRST TIP STYLE | |
| CNPD | FIRST TIP TAPER LENGTH | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.710 |
| CNPF | SECOND TIP TAPER LENGTH | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.710 |
| CNPS | FIRST TIP THICKNESS | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| CNPT | SECOND TIP THICKNESS | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | NOT IDENTICAL |
| CNQK | SECOND TIP STYLE | |
| CRZC | RIGHT TOP INSIDE ANGLE | DEGREES NOMINAL 90.0 |
| CSMZ | LEFT TOP INSIDE ANGLE | DEGREES NOMINAL 90.0 |
| FEAT | SPECIAL FEATURES | ALONG LENGTH FLANGES ON BOTH SIDES NARROW FROM NORMAL WIDTH FROM CENTER (AT 4.04 IN. FROM FIRST TIP) TO 1.01 IN. FROM CENTER (AT 6.73 IN. FROM FIRST TIP); FLANGES WIDEN FROM 1.01 IN. FROM CENTER (AT 13.18 IN. FROM FIRST TIP) TO NORMAL WIDTH (AT 15.88 IN. FROM FIRST TIP); WEAPONS SYSTEM IS AIRCRAFT, B-2 BOMBER (ATB) |
| HEAT | HEAT TREATMENT | ANNEALED |
| MATT | MATERIAL | TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-T-81556, CO- AB-1 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CVC10010-161GA | 80378 |