NSN 5910-00-450-9913 · NIIN 004509913 · FSC 5910
NO DASHES 5910004509913
In Stock
CAPACITOR,FIXED,MICA DIELECTRIC
Capacitors
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRDN | TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -0.0 TO 70.0 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.390 |
| AAQL | BODY STYLE | |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.435 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -5.00 TO 5.00 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 50000.0 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.0008 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 270.000 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 500.0 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.256 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| MATT | MATERIAL | CASE PLASTIC |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 94580-959514 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.000 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.160 |