NSN 3020-00-929-5708 · NIIN 009295708 · FSC 3020
NO DASHES 3020009295708
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.086 |
| ANTP | BORE STYLE | |
| BDZQ | BACKLASH DESIGNATION | GRADE C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI 303 TO SAE 30303 |
| STYL | STYLE DESIGNATOR | |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.353 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 56 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.125 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.3323 AND INCHES MAXIMUM 0.3333 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.093 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.218 |
| CWNH | TOOTH FORM | STANDARD |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AJLA | TEETH QUANTITY | 32 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |