NSN 5905-00-434-1686 · NIIN 004341686 · FSC 5905
NO DASHES 5905004341686
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 0.940 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY CLOSED |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | AC 1.500 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.50 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 64.00 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 2 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.470 |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 125.0 AND 28.0 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.590 |
| AEDX | SHAFT STYLE | |
| AEEA | SWITCH TYPE | ROTARY |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.245 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 3.0 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.870 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| ARNH | OPERATING POSITION | END OF ROTATION |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | SWITCH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.5 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 295.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| CQTM | TERMINAL LOCATION | REAR-BOTTOM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.25 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -20.0 TO 20.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.500 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.126 |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -55 DEG CELSIUS SINGLE SECTION -0.0 TO 6.9 AND -25 DEG CELSIUS SINGLE SECTION -0.0 TO 3.8 AND 0 DEG CELSIUS SINGLE SECTION -0.0 TO 1.9 AND 25 DEG CELSIUS SINGLE SECTION -0.0 TO 0.0 AND 85 DEG CELSIUS SINGLE SECTION -2.5 TO 2.5 AND 120 DEG CELSIUS SINGLE SECTION -0.0 TO 5.6 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.250 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 8.00 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 275.0 |