NSN 3040-00-444-9625 · NIIN 004449625 · FSC 3040
NO DASHES 3040004449625
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Miscellaneous Power Transmission Equipment
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.188 |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES NOMINAL 8.437 |
| AEDN | TIP LENGTH | BOTH ENDS INCHES NOMINAL 0.469 |
| SCSZ | CROSS SECTION SIZE | DIAMETER SECOND END INCHES NOMINAL 0.375 |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| AXYS | SPLINE TYPE | FIRST END INVOLUTE |
| AAJD | THREAD CLASS | 2B |
| APTD | END TYPE | SECOND END THREADED MALE |
| AWZY | END CONNECTION TYPE | BOTH ENDS UNION FERRULE |
| SFTT | SURFACE TREATMENT | CASING PASSIVATE |
| ADMS | WRENCHING FACILITY OUTSIDE DIAMETER | BOTH ENDS INCHES NOMINAL 0.750 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | BOTH ENDS UNEF |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS SERRATED SURFACE |
| CFRM | TORSIONAL DEFLECTION RATING | 0.2 DEG PER IN.-LB WINDING AND UNWINDING TORSIONAL DEFLECTION |
| AASA | THREAD LENGTH | BOTH ENDS INCHES NOMINAL 0.469 |
| AGJR | MINOR DIAMETER | SPLINE FIRST END INCHES NOMINAL 0.226 |
| AGJS | PITCH DIAMETER | FIRST END INCHES NOMINAL 0.250 |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 |
| AXFH | SPLINE LENGTH | FIRST END INCHES NOMINAL 0.437 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 10.062 |
| SCSZ | CROSS SECTION SIZE | DIAMETER FIRST END INCHES NOMINAL 0.406 |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES NOMINAL 0.500 |
| CFRW | END OVERALL DIAMETER | BOTH ENDS INCHES NOMINAL 0.437 |
| CFRZ | CORE OVERALL LENGTH | INCHES NOMINAL 9.594 |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| CFSF | CORE TIP THREAD CLASS | 2A |
| CFSJ | CORE TIP THREAD LENGTH | SECOND END INCHES NOMINAL 0.469 |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
| FEAT | SPECIAL FEATURES | 0.126 IN. DIA BORE 0.375 IN. DEEP @WITH 0.038 IN. DIA PIN THRU 0.281 @IN. @FROM END SECOND CORE END |
| MATT | MATERIAL | CASING NICKEL ALLOY |
| MATT | MATERIAL | CORE COPPER |
| AAUJ | SPLINE MAJOR DIAMETER | FIRST END INCHES NOMINAL 0.292 |
| ABFF | FURNISHED ITEMS | SECOND END SETSCREW |
| CFSH | CORE TIP THREAD DIRECTION | SECOND END RIGHT-HAND |
| ABSA | SPLINE QUANTITY | 12 |
| APTD | END TYPE | FIRST END ROUND, INTERNAL SPLINED |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |