NSN 4730-00-009-0390 · NIIN 000090390 · FSC 4730
NO DASHES 4730000090390
In Stock
BOLT,FLUID PASSAGE
Hose, Pipe, Tube, Lubrication, and Railing Fittings
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRPF | SECOND END THREAD SERIES DESIGNATOR | UNF |
| ACMR | SECOND END THREAD CLASS | 3A |
| ACMS | SECOND END THREAD DIRECTION | RIGHT-HAND |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.750 |
| AAXC | CONCENTRIC HOLE DIAMETER | INCHES MINIMUM 0.190 AND INCHES MAXIMUM 0.200 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.495 AND INCHES MAXIMUM 1.565 |
| ACKM | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACKN | FIRST END STYLE DESIGNATOR | |
| ACLK | FIRST END THREAD CLASS | 3A |
| ATKZ | FIRST END THREAD LENGTH | INCHES MINIMUM 0.335 AND INCHES MAXIMUM 0.340 |
| ATLF | SECOND END THREAD LENGTH | INCHES NOMINAL 0.267 |
| BBLF | WRENCHING FEATURE HEIGHT | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.130 |
| MATT | MATERIAL | STEEL COMP 347 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ACLS | SECOND END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACLT | SECOND END STYLE DESIGNATOR | |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNF |
| CQYM | FIRST END NOMINAL THREAD SIZE | INCHES 0.438 |
| CRCN | SECOND END SEAT ANGLE | DEGREES NOMINAL 37.0 |
| CRNB | SECOND END NOMINAL THREAD SIZE | INCHES 0.438 |
| BBDF | WRENCHING FEATURE STYLE | |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | INCHES MINIMUM 0.423 AND INCHES MAXIMUM 0.428 |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | INCHES MINIMUM 0.435 AND INCHES MAXIMUM 0.445 |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.140 |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | INCHES MINIMUM 0.620 AND INCHES MAXIMUM 0.630 |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | INCHES MINIMUM 0.535 AND INCHES MAXIMUM 0.565 |
| AAQL | BODY STYLE |