NSN 9925-01-450-8788 · NIIN 014508788 · FSC 9925
NO DASHES 9925014508788
In Stock
SPRINKLER,HOLY WATER
Ecclesiastical Equipment, Furnishings, and Supplies
Technical characteristics
3 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | SHALL HAVE SEVEN HOLES .018+/-.005 INCH DIAMETER WITH SIX HOLES SPACED AT 60 DEGREE ANGLES FROM CENTER HOLE; PORTION OF SPRINKLER HEAD THAT SCREWS INTO WATER TUBE SHALL HAVE A PLASTIC WASHER AROUND IT TO PREVENT LEAKAGE; WATER TUBE SHALL BE 3-5/8 INCH LONG WITH AN OUTSIDE DIAMETER 3/4 INCH AND INTERIOR DIAMETER OF 5/8 INCH, NOMINAL; SHALL BE THREADED TO ALLOW SPRINKLER HEAD TO BE SCREWED INTO IT; EDGES OF TOP OF CLOSURE CAP AND CENTER RING OF SPRINKLER HEAD SHALL BE SERRATED TO ALLOW EASY GRIP FOR CLOSING AND OPENING |
| PGCD | PROCUREMENT GROUP CODE | 21721 |
| TEXT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | ONE EACH; SHALL BE A MANUFACTURED ITEM OR COMMERCIAL EQUIVALENT, MATERIAL SHALL BE BRASS, .32 INCH THICKNESS IN TUBE AND CAP; OVERALL LENGTH 4-1/8 INCH NOMINAL; PARTS CONSIST OF THE WATER TUBE, SPRINKLER HEAD, AND CLOSURE CAP; CLOSURE CAP SHALL BE 5/8 INCH IN DIAMETER WITH A TOP 3/4 INCH IN DIAMETER, NOMINAL. TOP OF CLOSURE CAP SHALL HAVE AN ENGRAVED CROSS 5/8 INCH LONG WITH A 1/2 INCH BAR, NOMINAL; CLOSURE CAP SHALL BE THREADED TO SCREW ONTO SPRINKLER HEAD; CLOSURE CAP SHALL HAVE A PLASTIC INSERT OR WASHER TO PREVENT LEAKAGE; SPRINKLER HEAD SHALL BE 1/2 INCH IN HEIGHT, NOMINAL; IT SHALL BE THREADED ON BOTH ENDS IN ORDER TO SCREW INTO THE WATER TUBE AND ALLOW CLOSURE CAP TO SCREW ONTO IT |