NSN 5307-01-236-1908 · NIIN 012361908 · FSC 5307
NO DASHES 5307012361908
In Stock
STUD,SHOULDERED
Studs
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 0.720 |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 0.670 AND INCHES MAXIMUM 0.690 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| AAVK | SHOULDER LENGTH | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.125 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.880 |
| ADDB | NUT END SHANK LENGTH | INCHES MINIMUM 0.330 AND INCHES MAXIMUM 0.350 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.250 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.250 |
| CSYM | SURFACE FINISH | OVERALL MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | SHOULDER BEARING SURFACE MICROINCHES 63.0 |
| CTDT | NUT END SHANK DIAMETER | INCHES NOMINAL 0.310 |
| FEAT | SPECIAL FEATURES | SHOULDER IS D-SHAPED WITH CENTER TO FLAT AT 0.245 TO 0.255 IN.; GROOVE LOCATED BETWEEN SHANK AND SHOULDER,0.280 TO 0.285 IN.DIA,0.030 TO 0.040 IN. WIDE; GROOVE LOCATED BETWEEN SHANK AND NUT END THREAD,0.221 TO 0.231 IN. DIA,0.270 IN. MAX WIDE |
| MATT | MATERIAL | NICKEL ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 7471 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIIN 012203389. An older drawing citing one of those numbers resolves here.