NSN 3020-01-178-5847 · NIIN 011785847 · FSC 3020
NO DASHES 3020011785847
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Application: F101 ENG B1B ACFT
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 16 |
| AGAV | END ITEM IDENTIFICATION | F101 ENG B1B ACFT |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.7000 |
| AJLA | TEETH QUANTITY | 67 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.8000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL SUPERFICIAL 30-N MINIMUM 75.5 AND ROCKWELL SUPERFICIAL 30-N MAXIMUM 80.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.895 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 3.320 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 2.060 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.790 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.470 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.823 |
| CWTB | COUNTERBORE NOMINAL DEPTH | BOTH ENDS INCHES 0.925 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.959 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.181 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.400 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.156 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 1.710 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 1.181 |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL OXIDE |
| STYL | STYLE DESIGNATOR |