NSN 5305-00-490-4580 · NIIN 004904580 · FSC 5305
NO DASHES 5305004904580
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.250 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S51957 AND MANUFACTURERS SPECIFICATION CONTROL 06481-950726L TO INACTIVE TO |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.155 AND INCHES MAXIMUM 0.167 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 9C |
| AAJD | THREAD CLASS | 2A |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.086 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 316 |
| CYBA | SCREW SURFACE TREATMENT | OXIDE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-13924,CL 4 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.183 AND INCHES MAXIMUM 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.062 |
Supersedes
This item replaces cancelled NIIN 000811356. An older drawing citing one of those numbers resolves here.