NSN 5340-01-534-9048 · NIIN 015349048 · FSC 5340
NO DASHES 5340015349048
In Stock
CLAMP,LOOP
Hardware, Commercial
Application: C-17A AIRCRAFT
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.218 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 1.485 AND INCHES MAXIMUM 1.515 |
| AGAV | END ITEM IDENTIFICATION | C-17A AIRCRAFT |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| AJRB | MATERIAL DIAMETER | INCHES MINIMUM 0.078 AND INCHES MAXIMUM 0.108 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.829 AND INCHES MAXIMUM 0.859 |
| AZDE | CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE | INCHES MINIMUM 1.110 AND INCHES MAXIMUM 1.265 |
| MATT | MATERIAL | BAND PLASTIC, POLYETHYLENE (PP) |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.171 |
| BZTP | DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.265 |
| FEAT | SPECIAL FEATURES | NAME SUBMITTED FOR CATALOGING-CLAMP, LOOP;DRAWING NAME CLAMP, LOOP-OFFS=T ENTRY, PLASTIC, W/ELASTOMERIC INSERT;ITEM CONSISTS OF 1 WHITE MOLDED UNSUPPORTED SILICONE RUBBER INSERT(DMS 2221)50 DUROMETER;ITEM HAS 1 SLOTTED HOLE WHICH IS 0.200 IN. LONG;0.067 IN. WIDE;OPERATING TEMP RANGE -40 DEGREES TO +275 DEGREES FAHRENHEIT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE AST- D4066 |