NSN 5905-00-552-3115 · NIIN 005523115 · FSC 5905
NO DASHES 5905005523115
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 25.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 9 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0650 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 340.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.30 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.30 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.531 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.7497 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0650 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0650 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 0.883 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.1248 |
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 0.25 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -2.0 TO 2.0 AND 2ND SECTION -4.0 TO 4.0 AND 3RD SECTION -4.0 TO 4.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.50 TO 0.50 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 85.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 0.8830 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.830 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 12.000 AND KILOHMS 2ND SECTION 10.000 AND KILOHMS 3RD SECTION 10.000 |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |