NSN 5910-00-850-9756 · NIIN 008509756 · FSC 5910
NO DASHES 5910008509756
In Stock
CAPACITOR,FIXED,PLASTIC DIELECTR
Capacitors
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.922 |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHMS 100.0 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CWSS | DIELECTRIC MATERIAL | PLASTIC POLYETHYLENE TEREPHTHALATE (PET)(POLYESTER) |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 400.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 0.150 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.703 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.359 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CWPN | POWER FACTOR AT REFERENCE TEMP IN PERCENT | 1.000 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.625 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 72314-1108-2101 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -20.00 TO 20.00 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 100000.0 |
| MATT | MATERIAL | CASE PLASTIC |
| AFHW | INTERNAL ELECTRICAL CONNECTION TYPE | INSERTED TAB |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.032 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES MINIMUM 0.813 AND INCHES MAXIMUM 0.875 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |