ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5340-01-724-4754
NSN 5340-01-724-4754  ·  NIIN 017244754  ·  FSC 5340
NO DASHES 5340017244754
In Stock

BRACKET,DOUBLE ANGLE

Hardware, Commercial

Application: F-15EX

Technical characteristics

30 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AHQACENTER SECTION WIDTHINCHES NOMINAL 1.46
AHPXSECOND LEG THICKNESSINCHES NOMINAL 0.063
AHLWSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTHINCHES NOMINAL 0.320
ADLLSECOND LEG LENGTHINCHES NOMINAL 0.725
AGAVEND ITEM IDENTIFICATIONF-15EX
AHLFSECOND LEG WIDTHINCHES NOMINAL 1.46
AKCUSECOND LEG HOLE ARRANGEMENT STYLE
CSSPSECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
CSSQFIRST LEG ANGLEDEGREES NOMINAL 0.12
CSSRSECOND LEG ANGLEDEGREES NOMINAL 0.12
AHLNSECOND LEG HOLE DIAMETERINCHES MINIMUM 0.166 AND INCHES MAXIMUM 0.172
AJZUFIRST LEG STYLE
AKAUFIRST LEG HOLE ARRANGEMENT STYLE
AKBUSECOND LEG STYLE
AHLPSECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTHINCHES NOMINAL 0.820
AHLVSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTHINCHES NOMINAL 0.320
AHLGSECOND LEG CORNER RADIUSINCHES NOMINAL 0.25
AHLKFIRST LEG HOLE DIAMETERINCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.103
CXCYPART NAME ASSIGNED BY CONTROLLING AGENCYBRACKET ASSEMBLY - CLAMP SUPPORT
MATTMATERIALALUMINUM ALLOY 7050
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONASSN STD SINGLE MATERIAL RESPONSE A-S4050,T7451
PRPYPROPRIETARY CHARACTERISTICSPACS
SFTTSURFACE TREATMENTPRIMER EPOXY
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL SPEC SINGLE TREATMENT RESPONSE -IL-RF-85582
STYLSTYLE DESIGNATOR
AHPWFIRST LEG THICKNESSINCHES NOMINAL 0.063
AHQPFIRST LEG CORNER RADIUSINCHES NOMINAL 0.25
AHRBFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTHINCHES NOMINAL 0.380
AHQNFIRST LEG WIDTHINCHES NOMINAL 1.46
AHQBCENTER SECTION THICKNESSINCHES NOMINAL 0.063