NSN 5340-01-718-9063 · NIIN 017189063 · FSC 5340
NO DASHES 5340017189063
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Application: F-15EX
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| ASXK | HOLE QUANTITY | 5 |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | RADIANS NOMINAL 0.12 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.460 |
| AHPZ | CENTER SECTION HEIGHT | INCHES NOMINAL 0.650 |
| AHQA | CENTER SECTION WIDTH | INCHES NOMINAL 1.460 |
| AHQB | CENTER SECTION THICKNESS | INCHES NOMINAL 0.080 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 1.460 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES NOMINAL 0.250 |
| CSSR | SECOND LEG ANGLE | RADIANS NOMINAL 0.12 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET ASSEMBLY, CLAMP SUPPORT, ZEE, PLATE NUT, FULL SIZE HOLES |
| MATT | MATERIAL | ALUMINUM ALLOY 7050 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S 4050, T7451 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | ANODIZE AND PRIMER AND PAINT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625, TYE II, CLASS 1 AND MIL SPEC 1ST TREATMENT RESPONSE --S423, -IL-RF-23377 OR -IL-RF-85582 ER S13630 AS NOTED AND NATIONAL STD/SPEC 3RD TREATMENT RESPONSE S13630, A-S-STD-595 COLOR NU-BER 17925 AS NOTED |
| STYL | STYLE DESIGNATOR | |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SPECIFICATION 76301-9-1080 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.320 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.320 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.080 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.080 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.820 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES NOMINAL 0.250 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.166 AND INCHES MAXIMUM 0.172 |
| AGAV | END ITEM IDENTIFICATION | F-15EX |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 1.460 |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.860 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.725 |