NSN 5340-01-117-9470 · NIIN 011179470 · FSC 5340
NO DASHES 5340011179470
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.750 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.750 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 1.000 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.263 AND INCHES MAXIMUM 0.266 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.129 AND INCHES MAXIMUM 0.134 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.063 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.063 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.980 AND INCHES MAXIMUM 1.020 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.500 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.250 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CBBL | FEATURES PROVIDED | NUT |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| FEAT | SPECIAL FEATURES | LEFT HAND ASSEMBLY |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-A-200 TO 3 T8511 OR FED SPEC 2ND MATERIAL RESPONSE QQ-A-250 TO 5 T81 OR FED SPEC 3RD MATERIAL RESPONSE QQ-A-250 TO 5 T72 |
| SFTT | SURFACE TREATMENT | PRIMER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MFR REF SINGLE TREATMENT RESPONSE --S405 COLOR 34151 GREEN FSC- 76301 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 002835340. An older drawing citing one of those numbers resolves here.