NSN 2920-01-174-5473 · NIIN 011745473 · FSC 2920
NO DASHES 2920011745473
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.750 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.6684 AND INCHES MAXIMUM 0.6990 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.312 |
| ADER | MOUNTING STYLE | |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| AHZV | SUBMERSIBILITY | SUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.406 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2000 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 60.0 |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 4.187 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 4.187 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.243 AND INCHES MAXIMUM 7.256 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.119 AND INCHES MAXIMUM 8.132 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.453 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 10000 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.375 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
Supersedes
This item replaces cancelled NIIN 011528552. An older drawing citing one of those numbers resolves here.