NSN 2920-00-314-0556 · NIIN 003140556 · FSC 2920
NO DASHES 2920003140556
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1600 |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 21.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 100.0 |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 4.125 |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 1.000 |
| AHZV | SUBMERSIBILITY | SUBMERSIBLE |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.250 |
| ADER | MOUNTING STYLE | |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.851 |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.375 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 1.125 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1650 |
| BCGN | GROUNDING METHOD | INTERNAL |
Supersedes
This item replaces cancelled NIIN 007928184. An older drawing citing one of those numbers resolves here.