NSN 3020-00-038-4487 · NIIN 000384487 · FSC 3020
NO DASHES 3020000384487
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 6 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.0000 |
| AJLA | TEETH QUANTITY | 15 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.566 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.062 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.499 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.188 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.706 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.563 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 3.250 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | SECOND END INCHES 0.328 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | SECOND END INCHES 2.500 |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | SECOND END INCHES 0.172 |
| FEAT | SPECIAL FEATURES | COUNTERBORE 0.125 IN. DEEP BY 2.035 IN. DIA 1ST END |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 005678826. An older drawing citing one of those numbers resolves here.