NSN 3416-00-828-3714 · NIIN 008283714 · FSC 3416
NO DASHES 3416008283714
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 3.0 |
| FEAT | SPECIAL FEATURES | 1 INDICATOR,THD DIAL,LATHE;4 JAW,FACEPLATE,6 IN.;1 KNURLING TOOL,SELFCENTERING,LATHE,5/8 BY 1-3/8 IN.;1 REST STEADY,LATHE ROLLER JAWS;1 SOCKET,TAPER SHANK TOOL,EXTENSION,NO. 4 MORSE TAPER SHANK;1 SOCKET,TAPER SHANK TOOL,REDUCING,NO. 2 MORSE TAPER SHANK;1 SOCKET,TAPER SHANK TOOL,REDUCING,NO. 3 MORSETAPER SHANK;1 STOP,CARRIAGE,LATHE MICROMETER;1 STOP,THD CUTTING,LATHE;1 TAPER ATTACHMENT,LATHE;1 TOOL POST,LATHE;1WRENCH,OPEN END;1 WRENCH,SPANNER;1 WRENCH,T HANDLE;1 WRENCH,TAILSTOCK;1 WRENCH,TOOL POST |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 1.766 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 12 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 25.0 TO 1500.0 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 10.750 |
| FAAZ | PHASE | THREE |
| AAXX | MOUNTING TYPE | BENCH |
| ACDC | CURRENT TYPE | AC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 30.000 |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 ADAPTER,HEADSTOCK,1-1/2 IN. DIA;1 ADAPTER,TAILSTOCK,1-1/2 IN. DIA;1 BAG,CANVAS,TRANSPOSING GEARS;1 BUSHING,SPINDLE;3 CENTER,LATHE,HARDENED;1 CHUCK,COLLECT SPINDLE NOSE,9 IN.;1 CHUCK,DRILL,1/8 THRU 5/8 IN. CAPACITY;1 CHUCK,INDEPENDENT JAW,6 IN.;1 CHUCK,INDEPENDENT JAW,10 IN.;1 CHUCK,UNIVERSAL JAW,5 IN.;1 COLLAR,LATHE METRIC TRANSPORING GEAR;1 COLLAR SET,MACHINE,1/16 THRU 1-3/8 IN.;1 COVER,LATHE,CANVAS;1 DOG,LATHE,1/2 IN.CAPACITY;1 DOG,LATHE,1-1/4IN. CAPACITY;1 DRIFT SET,DRILL SIZES 1-2 AND 3;1 FACEPLATE,METALWORKING,LATHE 9 IN. DIA;1 FACEPLATE,METALWORKING,LATHE 24 IN. DIA;1 GEAR SET,LATHE METRIC TRANSPOSING TO CUT .25 TO 2.50 MM;1 HOLDER,CUTTING TOOL BORING;1 HOLDER,CUTTING TOOL BORING 5/8 BY 1-1/4 IN.;1HOLDER,CUTTING TOOL,RH OFFSET,5/8 BY 1-3/8 IN.;1 HOLDER,CUTTING TOOL,STRAIGHT,5/8 BY 1-1/4 IN.;1 HOLDER,CUTTING TOOL,STRAIGHT,5/8 BY 1-3/8 IN.;1 HOLDER,CUTTING TOOL,TUNNING,LH,5/8 BY 1-3/8 IN.;1 HOLDER,CUTTING TOOL,TURNING,RH 5/8 BY 1-3/8 IN. |
| BTZR | THREAD QUANTITY RANGE | PER INCH 2.0 TO 112.0 |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| BTWG | ACTUAL SWING OVER CLOSED GAP | INCHES NOMINAL 17.750 |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| BTWF | RATED SWING OVER CLOSED GAP | INCHES NOMINAL 17.000 |
| BTWC | RATED SWING THROUGH OPEN GAP | INCHES NOMINAL 26.000 |
| BTWB | THREAD CHANGE QUANTITY | 48 |
Supersedes
This item replaces cancelled NIIN 005289771. An older drawing citing one of those numbers resolves here.