NSN 5305-00-914-7648 · NIIN 009147648 · FSC 5305
NO DASHES 5305009147648
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GRADE 8 |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.282 AND INCHES MAXIMUM 1.344 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 38.0 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| AASK | HEAD STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MATT | MATERIAL | OVERALL STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 150000 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.455 AND INCHES MAXIMUM 0.483 |
| SFTT | SURFACE TREATMENT | OVERALL ZINC AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE AST- B633 TY 2 SC 3 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 1.100 AND INCHES MAXIMUM 1.125 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.438 AND INCHES MAXIMUM 1.500 |
Supersedes
This item replaces cancelled NIIN 005434500. An older drawing citing one of those numbers resolves here.