NSN 3416-00-235-0529 · NIIN 002350529 · FSC 3416
NO DASHES 3416002350529
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 54.000 |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | NONE SPECIFIED |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 5.0 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 16 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 12.0 TO 530.0 |
| BTTD | RATED SWING | INCHES NOMINAL 21.500 |
| BTTF | ACTUAL SWING OVER BED | INCHES NOMINAL 22.500 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 14.250 |
| BTWB | THREAD CHANGE QUANTITY | 41 |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 2.500 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND OR POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND OR POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 41 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 1.0 TO 60.0 |
| ELEC | VOLTAGE IN VOLTS | 220.0 |
| FAAZ | PHASE | THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY CENTER TO CENTER DISTANCE,HOLE DIAMETER THROUGH SPINDLE,SPINDLE SPEED QUANTITY,SPINDLE SPEED RANGE IN RPM,ELECTRIC MOTOR QUANTITY,ELECTRIC MOTOR HORSEPOWER RATING,CURRENT TYPE,VOLTAGE IN VOLTS,FREQUENCY IN HERTZ,AND PHASE |