NSN 5310-00-964-0878 · NIIN 009640878 · FSC 5310
NO DASHES 5310009640878
In Stock
NUT,SELF-LOCKING,PLATE
Nuts and Washers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | WASHER ALUMINUM ALLOY OR STEEL |
| SFTT | SURFACE TREATMENT | WASHER ANODIZE OR CADMIUM OR CHROMATE |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 0.640 |
| TEST | TEST DATA DOCUMENT | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). 80205-NAS 1473 AND SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-N-25027 |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1473 |
| ADEC | PLATE WIDTH | INCHES MAXIMUM 0.568 |
| ADFK | NUT COUNTERBORE DEPTH | BASE INCHES MINIMUM 0.125 |
| ADFP | NUT MOUNTING PROVISION | STRAIGHT HOLES |
| SFTT | SURFACE TREATMENT | SHELL CADMIUM AND CHROMATE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | WASHER MIL SPEC SINGLE MATERIAL RESPONSE -IL-N-25027 |
| SFTT | SURFACE TREATMENT | NUT CADMIUM AND CHROMATE |
| AAWY | COUNTERBORE DIAMETER | BASE INCHES MINIMUM 0.229 |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ABFF | FURNISHED ITEMS | PREFORMED PACKING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NUT MIL SPEC SINGLE MATERIAL RESPONSE -IL-N-25027 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SEAL MIL SPEC SINGLE MATERIAL RESPONSE -IL-R-6855,CLASS 1,GRADE 60 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHELL MIL SPEC SINGLE MATERIAL RESPONSE -IL-N-25027 |
| ACVN | NUT LENGTH | INCHES MAXIMUM 0.989 |
| ADEA | NUT HEIGHT | INCHES MAXIMUM 0.313 |
| ADEB | PLATE THICKNESS | INCHES MAXIMUM 0.085 |
| SPCL | SPECIAL TEST FEATURES | MAXMINUM LOCKING TORQUE 3 TIMES THE VALUE STATED IN MIL-N-25027 |
| SUPP | SUPPLEMENTARY FEATURES | NO QPL SHALL BE ESTABLSIHED |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| AZKQ | TEMP RATING | FAHRENHEIT MAXIMUM 225.0 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CBBL | FEATURES PROVIDED | FLOATING NUT |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| FEAT | SPECIAL FEATURES | 0.020 IN. MIN RADIAL FLOAT,0.030 IN. MAX AXIAL FLOAT; 50.0 PSIG MAX RATED PRESSURE,BLACK SEAL |
| MATT | MATERIAL | NUT STEEL |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.349 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.686 AND INCHES MAXIMUM 0.690 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.103 |
| MATT | MATERIAL | SEAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| MATT | MATERIAL | SHELL STEEL |
| ACTA | NUT STYLE |
Supersedes
This item replaces cancelled NIINs 007254311 · 008143061 · 009700350. An older drawing citing one of those numbers resolves here.