NSN 4720-01-375-1397 · NIIN 013751397 · FSC 4720
NO DASHES 4720013751397
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.625 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.812 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 3.880 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CBBL | FEATURES PROVIDED | NUTS DRILLED FOR LOCKWIRE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 5000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.062 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES MINIMUM WORKING 13.100 AND INCHES MAXIMUM WORKING 13.600 |
| FEAT | SPECIAL FEATURES | 2 CLAMPS REQUIRED; PREFORMED HOSE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCES 07482 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT (UNJ) |