NSN 5340-01-043-1564 · NIIN 010431564 · FSC 5340
NO DASHES 5340010431564
In Stock
CLAMP,BLOCK,SECTION
Hardware, Commercial
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.500 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.380 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.190 AND INCHES MAXIMUM 0.196 |
| ABTJ | MOUNTING HOLE QUANTITY | 3 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | INCHES NOMINAL 0.192 |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | INCHES NOMINAL 1.500 |
| AXPE | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES | INCHES NOMINAL 3.000 |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE(S) |
| BYGG | BLOCK HEIGHT | INCHES NOMINAL 0.250 |
| CWTD | CLAMPING HOLE QUANTITY | 6 |
| CWWM | CLAMPING HOLE DIAMETER | ALL HOLES INCHES NOMINAL 0.190 |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | INCHES NOMINAL 0.250 |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | INCHES NOMINAL 0.562 |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | INCHES NOMINAL 0.446 |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | INCHES NOMINAL 0.892 |
| CWYH | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES | INCHES NOMINAL 1.500 |
| CWYM | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES | INCHES NOMINAL 1.946 |
| CWYS | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SIXTH CLAMPING HOLES | INCHES NOMINAL 2.392 |
| MATT | MATERIAL | PLASTIC |
| STYL | STYLE DESIGNATOR |