NSN 3020-00-355-4193 · NIIN 003554193 · FSC 3020
NO DASHES 3020003554193
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.6000 |
| AJLA | TEETH QUANTITY | 23 |
| STYL | STYLE DESIGNATOR | |
| ABSA | SPLINE QUANTITY | 6 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.0000 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.437 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.062 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.585 |
| CWTR | HUB STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.750 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 3.062 |
| MATT | MATERIAL | OVERALL STEEL |
| CWNH | TOOTH FORM | STANDARD |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
Supersedes
This item replaces cancelled NIIN 003249796. An older drawing citing one of those numbers resolves here.