NSN 3110-01-084-2537 · NIIN 010842537 · FSC 3110
NO DASHES 3110010842537
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | MILLIMETERS NOMINAL 32.00 |
| ABXV | BORE DIAMETER | MILLIMETERS NOMINAL 45.00 |
| ADGA | OVERALL OUTSIDE DIAMETER | MILLIMETERS NOMINAL 75.00 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM AXIAL 0.0120 AND INCHES MAXIMUM AXIAL 0.0190 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| FEAT | SPECIAL FEATURES | STABILIZED FOR OPERATION AT M65 DEG F TO P600 DEG F,C58.0 MIN ROCKWELL HARDNESS RINGS AND BALLS,BEARING WITH POINT OF V TO HAVE SEPARABLE INNER RING |
| MATT | MATERIAL | BALL STEEL |
| MATT | MATERIAL | RETAINER STEEL |
| MATT | MATERIAL | INNER RING STEEL |
| MATT | MATERIAL | OUTER RING STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER ASSN STD SINGLE MATERIAL RESPONSE A-S 6415 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE MATERIAL RESPONSE A-S 6490 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6490 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE A-S 6490 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER RETAINER |
| PRMT | PRECIOUS MATERIAL | SILVER |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 78286-SB1139-101 |