NSN 3020-00-997-2293 · NIIN 009972293 · FSC 3020
NO DASHES 3020009972293
In Stock
GEAR,ANTIBACKLASH,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWNH | TOOTH FORM | STANDARD |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| MATT | MATERIAL | BODY ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | HUB STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | HUB FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,CLASS 303,COND A |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | BODY ANODIZE |
| SFTT | SURFACE TREATMENT | HUB PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.515 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.112 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.4990 AND INCHES MAXIMUM 1.5000 |
| AJLA | TEETH QUANTITY | 180 |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CWTR | HUB STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |