NSN 3120-00-364-7983 · NIIN 003647983 · FSC 3120
NO DASHES 3120003647983
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OUTER LAYER ANODIZE OR CHROMIUM |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.3755 AND INCHES MAXIMUM 0.3765 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.2505 AND INCHES MAXIMUM 0.2515 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 0.7300 AND INCHES MAXIMUM 0.7500 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.2975 AND INCHES MAXIMUM 0.3125 |
| MATT | MATERIAL | OUTER LAYER ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER LAYER FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 TO 3,T8511 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T851 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF LEFT FLANGE MICROINCHES 125.0 |
| FEAT | SPECIAL FEATURES | PLASTIC,POLYTETRAFLUOROETHYLENE LINER BONDED TO LEFT END SURFACE OF FLANGE |
| MATT | MATERIAL | INNER LAYER PLASTIC POLYTETRAFLUOROETHYLENE |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 125.0 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OUTER LAYER MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625,TYE1 AND MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625,TYE 2 AND MIL SPEC 2ND TREATMENT RESPONSE -IL-C-5541 |
| STYL | STYLE DESIGNATOR | |
| CSYM | SURFACE FINISH | LEFT END SURFACE OF BODY AND FLANGE MICROINCHES 125.0 |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| CSYM | SURFACE FINISH | INSIDE DIAMETER SURFACE OF BODY MICROINCHES 125.0 |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER UNDERCUT |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0575 AND INCHES MAXIMUM 0.0625 |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
Supersedes
This item replaces cancelled NIIN 012717735. An older drawing citing one of those numbers resolves here.