NSN 4720-01-311-8371 · NIIN 013118371 · FSC 4720
NO DASHES 4720013118371
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.781 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 300.0 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.297 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 2.094 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 12.500 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 270.0 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 2.375 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 2.375 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 3.000 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 3.000 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.388 |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES NOMINAL 0.062 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 2.760 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 1200.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 2.500 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 250.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 600.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 90.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 45.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 16.375 |
| CTCJ | FLANGE STYLE | |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |