NSN 4720-01-297-5130 · NIIN 012975130 · FSC 4720
NO DASHES 4720012975130
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.125 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 300.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.437 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 8.000 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 210.0 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 0.266 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 0.266 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 2.188 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 2.188 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.266 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | FIRST END PLAIN FACE FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 2000.0 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 1.625 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 500.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 1300.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 90.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 18.375 |
| CTCJ | FLANGE STYLE | |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |