ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / NSN 5307-01-276-9797
NSN 5307-01-276-9797  ·  NIIN 012769797  ·  FSC 5307
NO DASHES 5307012769797
In Stock

STUD,SHOULDERED

Studs

Technical characteristics

25 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONSTUD THREAD RIGHT-HAND
AAJFTHREAD DIRECTIONNUT THREAD RIGHT-HAND
AASATHREAD LENGTHSTUD THREAD INCHES NOMINAL 0.325
AASATHREAD LENGTHNUT THREAD INCHES NOMINAL 0.325
AAVHSHOULDER DIAMETERINCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.377
AAVKSHOULDER LENGTHINCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074
ABHPOVERALL LENGTHINCHES MINIMUM 1.330 AND INCHES MAXIMUM 1.360
ADDBNUT END SHANK LENGTHINCHES MINIMUM 0.433 AND INCHES MAXIMUM 0.443
CMLPTHREAD QUANTITY PER INCH32
CQJXNOMINAL THREAD SIZESTUD THREAD INCHES 0.190
CQJXNOMINAL THREAD SIZENUT THREAD INCHES 0.190
CRTLCRITICALITY CODE JUSTIFICATIONSUPP
CSJZSTUD END SHANK LENGTHINCHES MINIMUM 0.183 AND INCHES MAXIMUM 0.193
CSXHSTUD END SHANK DIAMETERINCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.190
CSYMSURFACE FINISHSHANK MICROINCHES 32.0
CTDTNUT END SHANK DIAMETERINCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.190
FEATSPECIAL FEATURES0.0791 IN. MIN 0.0806 IN. MAX INTHEX. WRENCHING ACCOM NUT END
MATTMATERIALTITANIUM ALLOY UNS R56400
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONASSN STD SINGLE MATERIAL RESPONSE A-S 4928 AND ASSN STD SINGLE MATERIAL RESPONSE A-S 4967
STYLSTYLE DESIGNATOR
SUPPSUPPLEMENTARY FEATURESSHANK DIA CLOSE TOL 0.1885 IN. MIN 0.1895 IN. MAX; 5380.0 LB MIN DBL SHEAR; 3180.0 LB MIN TENSION RATING
THSDTHREAD SERIES DESIGNATORNUT THREAD UNIFIED NATIONAL JOINT FINE (UNJF)
THSDTHREAD SERIES DESIGNATORSTUD THREAD UNIFIED NATIONAL JOINT FINE (UNJF)
ZZZKSPECIFICATION/STANDARD DATAMANUFACTURERS STANDARD 73197-HL146