NSN 5306-00-470-8728 · NIIN 004708728 · FSC 5306
NO DASHES 5306004708728
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.106 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE STSBS001 FSC- 98897 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3735 AND INCHES MAXIMUM 0.3745 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 156000 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.210 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.403 AND INCHES MAXIMUM 0.450 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.653 AND INCHES MAXIMUM 1.700 |
| AASK | HEAD STYLE | |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE STSBS001 FSC- 98897 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.520 AND INCHES MAXIMUM 1.552 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL AND CADMIUM AND CHROMATE |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.250 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |