NSN 5306-00-514-8713 · NIIN 005148713 · FSC 5306
NO DASHES 5306005148713
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: AIRCRAFT, PHANTOM F-4
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.093 AND INCHES MAXIMUM 1.150 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.266 AND INCHES MAXIMUM 0.333 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.214 AND INCHES MAXIMUM 1.261 |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, PHANTOM F-4 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.948 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE -AC S13145 FSC- 76301 |
| MATT | MATERIAL | OVERALL STEEL |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.154 AND INCHES MAXIMUM 0.174 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.439 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 08524-B-17028 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE 23-105 FSC- 76301 |