NSN 5306-00-431-7202 · NIIN 004317202 · FSC 5306
NO DASHES 5306004317202
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATD | EXTENDED WASHER THICKNESS | INCHES NOMINAL 0.083 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.055 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4360 AND INCHES MAXIMUM 0.4370 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-8837,TY 2,CL 2 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 51.0 AND ROCKWELL C MAXIMUM 54.0 |
| AAJD | THREAD CLASS | 3A |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.820 AND INCHES MAXIMUM 0.830 |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.865 AND INCHES MAXIMUM 1.885 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.674 AND INCHES MAXIMUM 2.704 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.464 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 260000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6485 OR ASSN STD SINGLE MATERIAL RESPONSE A-S6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.789 AND INCHES MAXIMUM 0.839 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
Supersedes
This item replaces cancelled NIIN 003382108. An older drawing citing one of those numbers resolves here.