NSN 5305-01-336-3215 · NIIN 013363215 · FSC 5305
NO DASHES 5305013363215
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.320 AND INCHES MAXIMUM 0.370 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.580 AND INCHES MAXIMUM 0.610 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.328 AND INCHES MAXIMUM 0.385 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 0.406 AND INCHES MAXIMUM 0.456 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |