NSN 5306-01-043-0008 · NIIN 010430008 · FSC 5306
NO DASHES 5306010430008
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.564 AND INCHES MAXIMUM 0.631 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.886 AND INCHES MAXIMUM 1.933 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.318 AND INCHES MAXIMUM 0.338 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.877 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.5607 AND INCHES MAXIMUM 0.5616 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | ALL HOLES INCHES MINIMUM 0.136 AND INCHES MAXIMUM 0.146 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.562 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.302 AND INCHES MAXIMUM 1.322 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | ALL HOLES INCHES MINIMUM 1.767 AND INCHES MAXIMUM 1.799 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 26512-GB511B |