NSN 5306-01-060-6843 · NIIN 010606843 · FSC 5306
NO DASHES 5306010606843
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.528 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.080 AND INCHES MAXIMUM 2.100 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.281 |
| AATB | WIDTH BETWEEN FLATS | INCHES MAXIMUM 0.901 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4982 AND INCHES MAXIMUM 0.4991 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.106 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.552 AND INCHES MAXIMUM 1.572 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.825 AND INCHES MAXIMUM 1.845 |
| FEAT | SPECIAL FEATURES | DRY FILM LUBE PER MIL-L-8937B ON BEARING SURFACE OF HEAD AND GRIP |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6487 |
| SFTT | SURFACE TREATMENT | THREADS CADMIUM |
| SFTT | SURFACE TREATMENT | TOP OF HEAD CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TOP OF HEAD NATIONAL SPEC SINGLE TREATMENT RESPONSE NAS672 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | THREADS NATIONAL SPEC SINGLE TREATMENT RESPONSE NAS672 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |