NSN 5306-01-030-4657 · NIIN 010304657 · FSC 5306
NO DASHES 5306010304657
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.443 AND INCHES MAXIMUM 0.493 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.141 AND INCHES MAXIMUM 2.171 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.310 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.304 AND INCHES MAXIMUM 0.313 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.438 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.059 AND INCHES MAXIMUM 0.079 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.678 AND INCHES MAXIMUM 1.698 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.949 AND INCHES MAXIMUM 1.989 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |