NSN 5306-01-683-6535 · NIIN 016836535 · FSC 5306
NO DASHES 5306016836535
In Stock
BOLT,SHEAR
Bolts
Application: F/A-18E & F AND EA-18G AIRCRAFT
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES NOMINAL 1.186 |
| AASK | HEAD STYLE | |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.296 AND INCHES MAXIMUM 3.326 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.69 AND INCHES MAXIMUM 0.71 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.05 AND INCHES MAXIMUM 0.06 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.8750 |
| AAZH | HEAD MINOR DIAMETER | INCHES MINIMUM 0.923 AND INCHES MAXIMUM 0.938 |
| AGAV | END ITEM IDENTIFICATION | F/A-18E & F AND EA-18G AIRCRAFT |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 1.615 AND INCHES MAXIMUM 1.625 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-CLOSE TOLERANCE,SPLINE DRIVE,FLANGE HEAD(220 KSI FTU)CRES |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-ST3-753 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD SINGLE TREATMENT RESPONSE A-S 2700 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD SINGLE MATERIAL RESPONSE A-S 5629 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.8730 AND INCHES MAXIMUM 0.8740 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.115 AND INCHES MAXIMUM 2.135 |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |