NSN 5306-01-165-7539 · NIIN 011657539 · FSC 5306
NO DASHES 5306011657539
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.526 AND INCHES MAXIMUM 0.576 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.036 AND INCHES MAXIMUM 2.066 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.247 AND INCHES MAXIMUM 0.287 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.383 AND INCHES MAXIMUM 0.389 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.575 AND INCHES MAXIMUM 0.585 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.035 AND INCHES MAXIMUM 0.055 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.490 AND INCHES MAXIMUM 1.510 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.828 AND INCHES MAXIMUM 1.868 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |